12V 200Ah LiFePO4 Battery: Long-Lasting Power for Industrial and Commercial Demands
Introduction: The Ideal Battery for High-Capacity Applications
In today’s energy-intensive industries, having access to safe, reliable, and long-lasting power is essential. The 12V 200Ah LiFePO4 battery is a preferred solution for businesses needing high-capacity, maintenance-free energy storage. Whether you’re powering a solar system, electric vehicle, or remote telecom site, this battery offers high performance, safety, and long service life.
At JREPOWER, we design and manufacture high-quality 12V 200Ah LiFePO4 batteries optimized for industrial and commercial use. Explore our solutions at jrepower.com.
What Is a 12V 200Ah LiFePO4 Battery?
A 12V 200Ah LiFePO4 battery is a lithium iron phosphate battery that stores approximately 2.56kWh of energy. Unlike traditional lead-acid batteries, LiFePO4 chemistry offers:
- Long cycle life (≥6000 cycles at 80% DOD)
- Consistent voltage output
- High energy efficiency
- Superior thermal and chemical stability
These characteristics make it ideal for deep-cycle applications across various commercial and off-grid energy systems.
Key Features of JREPOWER’s 12V 200Ah LiFePO4 Battery
🔋 High Energy Storage Capacity
With 2.56kWh of usable energy per unit, it’s ideal for powering entire systems or supporting heavy loads like refrigerators, pumps, lights, and inverters.
🧠 Smart Battery Management System (BMS)
Integrated BMS protects against overcharge, over-discharge, short circuit, and over-temperature. Supports RS485 / CANBus communication for remote monitoring.
🔄 Long Cycle Life
Expect 6000+ cycles, translating to more than 10 years of daily use with minimal degradation—far superior to AGM or GEL batteries.
⚡ Fast Charging & High Discharge Rate
Supports high-rate charging (up to 100A) and discharging (150A continuous), allowing for quick energy delivery and compatibility with high-load devices.
🧳 Lightweight & Compact
Weighs only ~25kg, significantly lighter than lead-acid batteries of similar capacity. Easier installation and transport, especially for mobile and off-grid setups.
🌱 Safe and Eco-Friendly
LiFePO4 is non-toxic, non-polluting, and highly stable, with no risk of thermal runaway or combustion.
Technical Specifications – JREPOWER 12V 200Ah LiFePO4 Battery
| Specification | Value |
|---|---|
| Nominal Voltage | 12.8V |
| Capacity | 200Ah |
| Energy | 2560Wh (2.56kWh) |
| Cycle Life | ≥6000 cycles @ 80% DOD |
| Charging Voltage | 14.6V |
| Max Continuous Discharge | 150A |
| Communication Protocol | RS485 / CAN / Bluetooth (optional) |
| Operating Temperature | -20°C to +60°C |
| Weight | ~25kg |
| Certification | CE, UN38.3, RoHS, IEC62619 |
🔧 Custom configurations available (IP65 casing, Bluetooth monitoring, low-temp heating, etc.)
Industrial and Commercial Applications
☀️ Solar Energy Storage
- Used in off-grid and hybrid PV systems
- Compatible with most 12V inverters and charge controllers
- Ideal for residential solar, small businesses, and rural electrification
🏞️ Off-Grid Cabins & RVs
- Powers lighting, appliances, water pumps, and electronics
- Lightweight solution for mobile setups with limited space
🛥️ Marine & Yacht Power
- Provides deep cycle power for boats and yachts
- Corrosion-resistant casing available for saltwater environments
🛰️ Telecom Backup
- Supplies power to remote towers, sensors, and data stations
- No maintenance required; perfect for hard-to-access locations
🚐 Utility Vehicles & Mobile Clinics
- Delivers high-capacity energy for electric carts, trailers, and mobile equipment
Case Study: Solar-Powered Telecom Tower Using JREPOWER 12V 200Ah LiFePO4 Batteries
A telecom infrastructure company deployed JREPOWER 12V 200Ah LiFePO4 batteries across 150+ remote tower sites in Southeast Asia. Key results:
- 💡 95% uptime during power outages
- 🔋 Reduced generator usage by 60%
- 🛠️ Maintenance cost dropped to near-zero
- 🗓️ Payback period < 2 years
Why Choose JREPOWER?
At JREPOWER, we engineer batteries that meet the strict requirements of commercial and industrial users:
- ✅ Built with A-grade LiFePO4 cells only
- ✅ Designed for high-discharge, high-frequency use
- ✅ Tested for shock, vibration, and temperature resistance
- ✅ OEM/ODM support for custom branding, cases, and system integration
We work closely with system integrators, energy consultants, and fleet managers to design tailored energy storage solutions that deliver long-term ROI.
🔗 Visit jrepower.com to request datasheets, drawings, or bulk pricing.
Conclusion: Power You Can Depend On
For businesses looking for a robust, high-capacity, and safe energy storage solution, the 12V 200Ah LiFePO4 battery offers the best of all worlds: long lifespan, fast charging, low maintenance, and unmatched reliability.
With JREPOWER, you’re not just buying a battery—you’re investing in a long-term energy solution backed by expert support and engineering.
